This document explains how to connect to the NI 9208. In this
document, the NI 9208 with spring terminal and the NI 9208 with
DSUB are referred to inclusively as the NI 9208.
Note Before you begin, complete the software and
hardware installation procedures in your chassis
documentation.
Note The guidelines in this document are specific to
the NI 9208. The other components in the system might
not meet the same safety ratings. Refer to the
documentation for each component in the system to
determine the safety and EMC ratings for the entire
system.
Safety Guidelines
Operate the NI 9208 only as described in this document.
Caution Do not operate the NI 9208 in a manner not
specified in this document. Product misuse can result in
a hazard. You can compromise the safety protection
built into the product if the product is damaged in any
2 | ni.com | NI 9208 Getting Started Guide
To Next Page
Loading...
