© National Instruments Corporation 27 SCC Quick Start Guide
Use Your Device in an Application
Refer to the DAQ Getting Started Guide for information.
Where to Go for Support
The National Instruments Web site is your complete resource for technical
support. At
ni.com/support you have access to everything from
troubleshooting and application development self-help resources to email
and phone assistance from NI Application Engineers.
National Instruments corporate headquarters is located at
11500 North Mopac Expressway, Austin, Texas, 78759-3504.
National Instruments also has offices located around the world to help
address your support needs. For telephone support in the United States,
create your service request at
ni.com/support and follow the calling
instructions or dial 512 795 8248. For telephone support outside the United
States, contact your local branch office:
Australia 1800 300 800, Austria 43 0 662 45 79 90 0,
Belgium32027570020, Brazil551132623599, Canada8004333488,
China 86 21 6555 7838, Czech Republic 420 224 235 774,
Denmark4545762600, Finland3850972572511,
France330148142424, Germany490897413130,
India918051190000, Israel972036393737, Italy3902413091,
Japan 81 3 5472 2970, Korea 82 02 3451 3400, Lebanon 961 0 1 33 28 28,
Malaysia 1800 887710, Mexico 01 800 010 0793,
Netherlands 31 0 348 433 466, New Zealand 0800 553 322,
Norway 47 0 66 90 76 60, Poland 48 22 3390150,
Portugal 351 210 311 210, Russia 7 095 783 68 51,
Singapore 1800 226 5886, Slovenia 386 3 425 4200,
SouthAfrica270118058197, Spain34916400085,
Sweden460858789500, Switzerland41562005151,
Taiwan 886 02 2377 2222, Thailand 662 278 6777,
United Kingdom 44 0 1635 523545
SCC-TC01 Analog Input»Temperature»Thermocouple CJC Source = Built In
Thermocouple Type = #
SCC-TC02 Analog Input»Temperature»Thermocouple CJC Source = Built In
Thermocouple Type = #
1
Use default value for parameters not specified in the table.
# Value is based on sensor specification.
Table 4. SCC Module and Corresponding NI-DAQmx Measurement Type (Continued)
SCC Module
Recommended NI-DAQmx
Measurement Type
Recommended
Parameter Settings
1
To Next Page
Loading...
Need help?
General
