Emergency mode
EVC 13 is equipped with an ”Emergency mode” (position 3) on
the operating mode switch, as an additional safety measure. This
mode can be used if the normal automatic controls do not work.
In this mode, the max thermostat controls the boiler/supply
temperature to the set value. Circulation pump and immersion
heater in operation. The immersion heater is limited to 6 kW.
Any water heater is supplied with power.
Effekt-
begränsning
kW
Temperatur
begränsning
50°C
20
80
60
40
7030
97
11
13
5
5
35
3010
25
20
15
Säkrings-
storlek (A)
Resetting the temperature limiter
If the temperature limiter has tripped, it is reset by pressing
the reset button, using a screwdriver or similar.
Effekt-
begränsning
kW
Temperatur
begränsning
50°C
20
80
60
40
7030
97
11
13
5
5
35
3010
25
20
15
Säkrings-
storlek (A)
NOTE
If the cause of the malfunction cannot be located and
rectified using the above, a service must be requested.
EVC 1314
English
Rectifying any malfunctions