List of components
Immersion heater 13 kW1
Combined max thermostat and temperature limiter6
Fuse, pump, automatic heat controls, 2.5 A7
Power switch, positions 0 – 1 – 2 – 38
Terminal block, power supply9
Contactor, immersion heater control10
Clock, for ”Clock function”12
Terminal block, neutral and tariff control of external
water heater
13
Terminal block, safety extra low voltage (SELV)14
Outside sensor15
Circulation pump16
Boiler temperature sensor18
Switch, tariff control of external water heater (access-
ory)
19
Neutral terminal block (accessory)20
Current sensor21
Load relief (accessory)22
Switch, ”Constant day” – ”Automatic”– ”Constant
night reduction”
25
Terminal block for power supply to external water
heater
26
Fuse kit (accessory)27
Relay card29
Contactor (accessory)31
Microprocessor card34
Temperature gauge, boiler water40
Pressure gauge, boiler water42
Vent nipple, expansion vessel43
Bypass valve48
Filler valve49
Draining valve*51
Safety valve, boiler water 2.5 bar52
Contactor, immersion heater control67
R 20 ext.Supply line, radiator water70
R 20 ext.Return line, radiator water71
Lead in hole for supply cable to external water heater75
HP pipe 16 mmElectrical inlet, safety extra low voltage (SELV)76
HP pipe 16 mmElectrical inlet, tariff control77
HP pipe 25 mmElectrical inlet, supply78
Ø 15 mmFiller connection79
R 15 ext.Drain connection, boiler water*80
Pressure expansion vessel; 12 litre, pre-pressure 50 kPa (0.5 bar)85
Compression ring 22 mmConnection overflow pipe safety valve boiler water86
Serial number plate103
*Not visible in the image
EVC 1326
English
Component positions
To Next Page
Loading...
