Nibe F1155 - Page 34

curve
heating curve
heating curve1.9.1.1
system
outdoor temp. °C
flow temperature °C
Setting range: 0 - 15
Default value: 9
cooling curve (accessory
required)
cooling curve 1.9.1.2
system
outdoor temp. °C
flow temperature °C
Setting range: 0 - 9
Default value: 0
Menu
1.9.1
You can select heating or cooling in the curve menu. The next menu
(heating curve/cooling curve) shows the heating and cooling curves for
your house. The task of the curve is to give an even indoor temperature,
regardless of the outdoor temperature, and thereby energy efficient op-
eration. It is from these heat curves that the heat pump’s control computer
determines the temperature of the water to the system, the supply tem-
perature, and therefore the indoor temperature. Select the curve and read
off how the supply temperature changes at different outdoor temperatures
here. The number to the far right of "system" displays which system you
have selected the heating curve/cooling curve for.
NIBE™ F1155Chapter 3 | F1155 – at your service34