INSULATION, IMMERSION HEATER
NOTE
Electrical installation and service must be car-
ried out under the supervision of a qualified
electrician. Electrical installation and wiring
must be carried out in accordance with the
stipulations in force.
1.
Remove the cover for the junction box according to
the description on page 27.
2.
Grip the handle and pull the insulation carefully to-
wards you as illustrated.
TIP
Remove the hatch for the immersion heater
card so that it is easier to remove the insulation
(see page 27).
11Chapter 2 | Delivery and handlingNIBE F730
To Next Page
Loading...
