Nibe F730 - NIBE F730: Key Features

INSTALLATION AREA
Leave a free space of 800 mm in front of the product.
Leave free space between F730 and wall/other ma-
chinery/fittings/cables/pipes etc. It is recommended that
a space of at least 10 mm is left to reduce the risk of
noise and of any vibrations being propagated.
800
100
NOTE
Ensure that there is sufficient space (300 mm)
above the heat pump for installing ventilation
hoses.
Supplied components
Room sensorOutside sensor
LEK
Extra air filterVent hose
(length 4 m)
LEK
LEK
Gasket2 x tundish
LEK
LEK
Outdoor air damperExpansion vessel with
holder
(supplied separately)
Ambient sensor
Damper motor incl. 2
screws
Clips
Screw
O-rings
Front hatch,
air treatment section
LEK
Side panels,
air treatment unit
LOCATION
The kit of supplied items is placed on top of the product.
9Chapter 2 | Delivery and handlingNIBE F730