Inspection of the installation
Current regulations require the heating installation to be inspected before it is commissioned. The inspection must
be carried out by a suitably qualified person. In addition, fill in the page for the installation data in the User Manual.
DateSignatureNotesDescription
Ventilation (page 24)
Outdoor air damper
Setting ventilation flow exhaust air
Setting the ventilation flow outdoor air
Heating medium (page 18)
System flushed
System vented
Safety valve
Pressure in the climate system
Cold water (page 18)
Expansion vessel
Hot water (page 18)
Safety valve
Expansion vessel
T&P valve
Tundish
Electricity (page 26)
Connections
Main voltage
Phase voltage
Fuses heat pump
Fuses property
Outside sensor
Room sensor
Safety breaker
Earth circuit-breaker
Miscellaneous
Benchmark checklist
7Chapter 1 | Important informationNIBE F730
To Next Page
Loading...
