Control - Introduction
22.3°
KITCHEN
-5
.
6
°
Outdoor
12:45 05 Janu
a
ry
Status lamp
Space for memory card
Display
On/Off button (switch)
THE STATUS LAMP
The status lamp shines red if an alarm is triggered.
If the status lamp is red, you receive information and
suggestions for suitable actions on the display.
THE ON/OFF BUTTON
The On/Off button (switch) has two functions:
• start
• switch off
To start: Move the switch up.
To turn off: Move the switch down.
THE DISPLAY
Instructions, settings and operational information are
shown on the display.
SPACE FOR MEMORY CARD
On the left side of the room unit, there is space for a
memory card (Micro-SD), which can be used to upgrade
the software.
TIP
RMU S40 is updated automatically from the
main product when new software is available.
NAVIGATION
RMU S40 has a touchscreen where you simply navigate
by pressing and dragging with your finger.
SELECT
Most options and functions are activ-
ated by lightly pressing on the display
with your finger.
BROWSE
The dots at the bottom edge show that
there are more pages.
Drag to the right or left with your finger
to browse between the pages.
SCROLL
If the menu has several sub-menus,
you can see more information by drag-
ging up or down with your finger.
CHANGE A SETTING
Press the setting you want to change.
If it is an on/off setting, it changes as soon as you press
it.
If there are several possible values, a spinning-wheel
appears that you drag up or down to find the desired
value.
Press to save your change, or press to cancel.
HELP MENU
On the home screens, there is a symbol that in-
dicates that extra help is available.
Press the symbol to open the help text.
You may need to drag with your finger to see all text.
NIBE RMU S40 | GB30
To Next Page
Loading...
