Caution
You cannot change from only additional heat if you do not have a heat
pump connected.
Functions
"compressor" is that which produces heating and hot water for the ac-
commodation. If "compressor" is deselected, a symbol is displayed in the
main menu on the symbol for the control module. You cannot deselect
"compressor" in manual mode.
"addition" is what helps the compressor to heat the accommodation
and/or the hot water when it cannot manage the whole requirement
alone.
"heating" means that you get heat in the accommodation. You can
deselect the function when you do not wish to have heating running.
"cooling" means that you get cooling in the accommodation in hot
weather. This alternative requires an accessory for cooling or that the heat
pump has a built in function for cooling and is activated in the menu. You
can deselect the function when you do not wish to have the cooling run-
ning.
my icons
To Next Page
Loading...
