Technical specifications
StainlessEnamelCopperVPB 200
176178172litreVolume
7.84.82.0litreVolume, charge coil
80111101kgNet weight
10.110.113.0kWHeat transfer (60/50 °C at 50 °C hot water temperature)
8.28.38.0kWhHeat content at 50°C
235238230litreEquivalent amount of hot water (40°C)
0.90.90.9hoursHeating time (10 °C to 45 °C) 8 kW charge power
1.81.81.8hoursHeating time (10 °C to 80 °C) 8 kW charge power
85°CMax operating temperature
3/0.3bar/MPaMax pressure, primary side
10/1.0bar/MPaMax pressure, water heater
1215kWMax recommended heat pump size*
088 518088 517088 515Part No.
StainlessEnamelCopperVPB 300
282274272litreVolume
8.88.48.5litreVolume, charge coil
101143130kgNet weight
11.411.912.8kWHeat transfer (60/50 °C at 50 °C hot water temperature)
13.412.712.6kWhHeat content at 50°C
376364362litreEquivalent amount of hot water (40°C)
1.41.41.4hoursHeating time (10 °C to 45 °C) 8 kW charge power
2.82.82.8hoursHeating time (10 °C to 80 °C) 8 kW charge power
85°CMax operating temperature
3/0.3bar/MPaMax pressure, primary side
10/1.0bar/MPaMax pressure, water heater
12kWMax recommended heat pump size*
083 010083 011083 009Part No.
* Applies at maximum brine temperature of 10 °C and maximum of 53 °C in the tank.
19Chapter 8 | Technical dataVPB/VPBS
To Next Page
Loading...
