Nibe VPB Series - For the Installer; General Product Information and Assembly

Removing the covers
Front cover
1
2
LEK
LEK
1.
Remove the screws from the lower edge of the
front cover.
2.
Lift the cover out at the bottom edge and up.
Side covers
LEK
LEK
LEK
The side covers can be removed to facilitate the install-
ation.
1.
Remove the screws from the upper and lower
edges.
2.
Twist the cover slightly outward.
3.
Move the hatch backwards and slightly to the side.
4.
Pull the cover to one side.
5.
Pull the hatch forwards.
VPB/VPBSChapter 2 | Delivery and handling6