Nibe VVM 310 - NIBE Uplink Connection; TCP;IP Settings

Base card (AA2)
1 Remove the plastic cover
over (AA3). See instructions
in IHB.
2 Remove the plastic cover
over (AA2). See instructions
in IHB.
Screw
3 Remove the screw and
connect cables.
Input circuit board (AA3)
1 Remove the plastic cover
over (AA3). See instructions
in IHB.
Screw
2 Remove the screw and
connect cables.
45Chapter 7 | Component replacementNIBE™ VVM 310