Nibe VVM 310 - Scheduling Indoor Climate

scheduling
VFKHGXOLQJ
KHDWLQJ
RII
In the menu scheduling indoor cli-
mate (heating) is scheduled for each
weekday.
You can also schedule a longer period
during a selected period (vacation) in
menu 4.7.
Menu
1.3
heating
Increases or decreases in the accommodation temperature can be sched-
uled here for up to three time periods per day. If a room sensor is installed
Menu
1.3.1
and activated the desired room temperature (°C) is set during the time
period. Without an activated room sensor the desired change is set (of
setting in menu 1.1). One step is usually enough to change the room
temperature by one degree, but in some cases several steps may be re-
quired.
6&+('8/,1* +($7,1* 
DFWLYDWHG
VFKHGXOH 
V\VWHP
VFKHGXOH VFKHGXOH 
DOO
PRQ
WXHV
ZH
WKXU
IUL
VDW
VXQ
  
r
7LPH SHULRG $GMXVWLQJ'D\
$FWLYDWHG 6FKHGXOH 6\VWHP
&RQIOLFW
Schedule: The schedule to be changed is selected here.
Activated: Scheduling for the selected period is activated here. Set times
are not affected at deactivation.
System: Which climate system the schedule is for is selected here. This
alternative is only displayed if more than one climate system is present.
27NIBE™ VVM 310Chapter 3 | VVM 310 – at your service