CBOX1050
INSTALLATION AND PROGRAMMING MANUAL
57
OVIEW
CONTROLLER
9.4 COMMUNICATIONS BUSES
The 1050 control board communication bus is described in this section.
OVIEW CONTROLLER:
• The Oview controller is an optional programming and diagnostic tool, which plugs
directly into the 1050 control board using an RJ45 network cable and is part of the Nice
“Opera” control system.
• The Oview controller can be used in “stand-alone” mode via its front-panel keypad,
or it may be accessed via a Bluetooth-enabled PC when used with the optional OVBT
module and Oview Software Suite.
• This unit, when matched with the optional Oview Bluetooth module (OVBT; see below)
enables remote control and management of the gate controller.
• Remote control functions include most of the programming functions that are available
at the front panel LCD on the control board as well as software updates.
OVBT MODULE:
The optional OVBT Bluetooth module is used with the Oview controller and the “Oview
Software Suite” application for PC for localized wireless control of the gate controller.
O-VIEW SOFTWARE SUITE:
This software provides desktop level control of the gate controller. Other benefits included
with purchase of the OVBT module are software updates that can be downloaded as new
versions of software are made available.
OPTIONAL
OVBT
MODULE
www.ApolloGateOpeners.com | (800) 878-7829 | Sales@ApolloGateOpeners.com
To Next Page
Loading...