8- INSPECTION AND OPERATION
Proper inspection of all equipment is required to ensur e continuous
functionality, safety and to ensure reliable operation in all weather conditions.
Inspect electrical assemblies and wiring installations for damage, general
condition, and proper functioning to ensure the continued satisfactory
operation of the electrical system. Adjust, repair, overhaul, and test electrical
equipment and systems in accordance with the recommendations and
procedures in the gate operator system and/or component manufacturer’s
maintenance instructions.
Replace components of the electrical system that are damaged or defective
with identical parts, with manufacturer’s approved equipment, or its
equivalent to the original in operating characteristics, mechanical strength,
for and checks to be performed are listed below:
13
9 - EMERGENCY VEHICLE ACCESS
Contact us
Web: www.ApolloGateOpeners.com
Email: Sales@ApolloGateOpeners.com
Phone: (800) 878-7829
Fax: (330) 650-9004
manually operated by engaging the manual release lever (see section 5.4).
To Previous Page
Loading...
