8 – English
10. Lock the gearmotor
321
Follow this procedure for both gearmotors.
3.1 - Manually releasing the gearmotor (manual manoeuvre)
01. Raise the rubber cap
02. Fit the provided wrench and rotate it CW by 90°
Follow this procedure for both gearmotors.
3.2 - Manually locking the gearmotor (manual manoeuvre)
01. Move the gate to the halfway open position by hand
02. Raise the rubber cap
03. Fit the provided wrench and rotate it CCW by 90°
Follow this procedure for both gearmotors.
To Next Page
Loading...
Need help?
General
