Nidec Answer Drives 1000 Series - Page 18

Summary
Preface P. 6
Chapter 2 P. 17
Technical data
Chapter 5 P. 76
Reception, storage
and installation
Chapter 4 P. 54
General information
Chapter 3 P. 47
Application notes
Chapter 6 P. 115
Options
Chapter 7 P. 129
Preventive maintenance
Chapter 1 P. 15
Overview
and installation diagram
18
2
2.2 IDENTIFICATION INITIALS
Answer Drives 1000
NOTES:
• Each configuration different from the identification code corresponds to a different SAP code.
• STO function: for sizes up to 028F the STO function requires an external contactor on the main AC line.
• Dynamic Braking:
- The braking switch is always integrated for sizes up to 036F;
- For sizes from 045F to 290F the braking switch is available as an option;
- For sizes from 350F to 520 F the internal braking switch is not available
AD1 A XXX F B N F H N N N 00 NN
1, 2 ,3 4 5, 6, 7 8 9 10 11 12 13 14 15 16, 17 18, 19
AD1000
Product
series
Cooling
A = Air
Input Voltage
F = 380-480Vac
Dynamic braking N = Not installed
B = Installed
RFI filter N = Not installed
F = Installed
Communications expansion N = Not installed
P = Profibus and Ethernet (ETHPROFI board)
“Safe Torque Off” function N = Not installed
T = STO board installed
External power supply 00 = Not installed
10 = Control board external power supply (24Vdc)
Cart (only for Frame VIII) NN = Not installed CN = Trolley installed CR = Trolley with output reactor installed
Expansion board N = Not installed A = Expansion input and Real Time Clock (GIABA) B = I / O expansion and Real Time Clock (GIABB)
Keypad N = Not installed
H = Installed
Rated power in kVA
(See electrical data table)
Board Microprocessor
B = Basis board
2.2 IDENTIFICATION INITIALS