Nidec F600 - User Manual

Pump drive F600
Step By Step Guide
Frame sizes 3 to 11
www.controltechniques.com/support
DE
Seite 2
Diese Anleitung bietet Informationen für eine schnelle Inbetriebnahme eines einfachen Umrichter-Motor-Systems.
Bei aufwendigeren Systemen: Umfassende Betriebsanleitungen, Online-Videos und Hilfsmittel finden Sie unter
unserer Webadresse oder über den vorstehenden QR-Code.
Bitte lesen Sie die dem Umrichter beiliegende Sicherheitsdokumentation, bevor Sie den Umrichter montieren oder
in Betrieb nehmen.
Beim M300 ist unbedingt der Abschnitt 4.2 in der Steuerung – Kurzanleitung über die Webadresse bzw. den
vorstehenden QR-Code hinzuzuziehen, um die Safe Torque Off-Funktion in Sicherheitssystemen zu verwenden.
EN
Page 2
This guide provides a fast and simple start-up procedure for a basic drive and motor installation.
For help with more advanced installations: Comprehensive user guides, online videos and help tools can be
accessed using the web address or QR code above.
Please read the safety information booklet supplied with the drive before installation or set-up.
It is essential to read Section 4.4 in the F600 User Guide using the web address or QR code above prior
to using the Safe Torque Off function in safety systems.
Part Number: 0478-0621-03
Issue: 3

Nidec F600 Specifications

General

Brand	Nidec
Model	F600
Category	DC Drives
Language	English

Summary

F600 Drive Introduction

Key Features of the F600 Drive

Details the main features and characteristics of the F600 drive.

Step 1: Check the contents of the box

Step 2: Check model and voltage

Step 3: Mount the drive

Step 4: Select supply; motor cables and fuses

Step 5: Remove the finger guard breakouts

Step 6: Wire the drive up

F600 Control Terminal Connections

F600 Communications Connections

EIA-485 Serial Interface

Details the 2-wire EIA-485 serial interface and Modbus RTU protocol support.

USB;EIA-232 to EIA-485 Communication

Explains using external adapters for PC connection and remote keypad operation.

Step 7: Use the keypad

F600 Keypad Identifier

Overview of the keypad buttons and their functions for drive operation.

Editing Drive Parameters via Keypad

Detailed instructions on how to navigate and modify drive parameters using the keypad.

Step 8: Run the drive for the first time in Hand mode

Running Induction Motor in Open-Loop Control

Guides initial setup and operation for induction motors using OL control.

Running Permanent-Magnet Motor in RFC-S Sensorless Mode

Procedure for running permanent-magnet motors using RFC-S sensorless control.

Step 9: Running the drive in Auto mode

PID Control Feedback Scaling

Configures scaling for PID feedback devices like 4-20mA transducers.

Finding Flow Start Frequency;Speed

Determines the minimum reference for flow start, used for Positive Minimum Reference Clamp.

Setting PID Setpoint, Wake, and Sleep Thresholds

Configures PID setpoint, wake, and sleep thresholds for auto mode operation.

Auto Mode Operation and Sleep Verification

Initiates auto mode operation and verifies the drive's sleeping state functionality.

Drive Operating Modes and Features

Open-Loop (OL) Mode Configuration

Details how to set and use the Open-loop mode for induction motors.

Basic F600 Features for Pump Applications

Covers Auto Reset, Pipe Filling, and Dry Well/Low Load detection features.

No Flow, Over-cycle Protection, and Diagnostics

Covers no flow detection, over-cycle protection, and diagnostic trip logging.

Additional Information

Restoring Drive Defaults

Procedure to restore the drive to its original factory settings.

Appendix A: UL Information and Installation

UL File Reference and Operating Environment

Lists UL file references and specifies operating environmental conditions.

Enclosure Ratings and Mounting Requirements

Covers enclosure types, through-panel mounting, and bracket torque settings.

Terminal Torque and Electrical Installation Details

Covers terminal torque, overvoltage, branch protection, and cabling.

Motor Protection and Other Details

Details motor overload, thermal memory, and external sensor protection methods.