39 F600 Step By Step Guide
Appendix A UL information
A.1 UL file reference
These products are cUL Listed to Canadian and US requirements.
UL file reference is: NMMS/7 E171230.
Products that incorporate the Safe Torque Off (STO) function are Certified for Functional Safety.
UL file reference: FSPC E171230.
A.2 Operating environment
Pollution Degree
Products must be installed in a Pollution Degree 2 environment or better (dry, non-conductive
pollution only).
Ambient temperature
The drives have been evaluated for use at ambient temperatures up to 40 °C. The drives have
additionally been evaluated for 50 °C and 55 °C ambient air temperatures with a derated output.
The maximum surrounding air temperature is 55 °C.
A.3 Enclosure Ratings
Open Type
The products are Open Type as supplied.
Type 1
When fitted with a conduit box, the products meet the requirements for UL Enclosed Type 1.
Suitable conduit boxes are available.
A.4 Through-panel (Type 12) mounting
Mounting hole access
When the drive is through-panel mounted, the main terminal cover(s) must be removed in order to
provide access to the mounting holes. Once the drive has been mounted, the terminal cover(s) can
be replaced.
A.5 Mounting bracket torque setting
Frame sizes 3 & 4
Through panel mounting brackets should be tightened to a maximum torque of 2 N m (16.8 lb in).
A.6 Installation in air handling spaces (plenum rating)
These products have been evaluated in accordance with the Standard for Fire Test for Heat and Visible
Smoke Release for Discrete Products and their Accessories Installed in Air-Handling Spaces, UL 2043.
Products installed in air handling spaces must be Enclosed Type 1 as a minimum. A conduit box
must be fitted. Alternatively, the product can be through-panel mounted in a Type 12 enclosure with
the heatsink protruding through the wall of the enclosure into the air-handling space.
A.7 Mechanical Installation
Mounting
Products can be mounted on a vertical surface using the brackets provided. Several products may be
mounted side by side without airspace between them.
In installations where space is limited, products with frame sizes 3, 4 and 5 may be 'Tile Mounted'.
To Next Page
Loading...
