Nidec Answer Drives 1000 Series - Page 96

Summary
Preface P. 6
Chapter 2 P. 17
Technical data
Chapter 5 P. 76
Reception, storage
and installation
Chapter 4 P. 54
General information
Chapter 3 P. 47
Application notes
Chapter 6 P. 115
Options
Chapter 7 P. 129
Preventive maintenance
Chapter 1 P. 15
Overview
and installation diagram
Answer Drives 1000
96
2/2
5
CONTROL TERMINAL BLOCK
*Note: with inductive load (relay coil) connect a suitable diode in parallel.
Function
Programmable
opto-isolated
digital inputs
Power supply I/O
(see jumper P9)
Programmable
opto-isolated
analogue inputs
(referred to
AI/AO ground)
Terminal
J12-22
J12-23
J12-24
J12-25
J12-26
J12-27
J12-28
J12-29
J12-30
J12-31
J12-32
J12-33
J12-34
J12-35
J12-36
J12-37
Initials
DI 3 Prog
DI 4 Prog
DI 5 Prog
DI 2 Prog (RV)
DI 1 Start/Stop FW
DI 0 Drive Enable
DO1 Progr (see Note)*
DO2 Progr (see Note)*
I/O supply +24Vdc
DI / DO ground
AI/AO ground
AI 1-
AI 1+
AI 2-
AI 2+
AI/AO ground
Description
Programmable opto-isolated digital inputs
voltage excursion 0 ÷ 36Vdc
rated voltage 24Vdc
rated current 5mA
minimum trigger voltage 20Vdc
release voltage < 16Vdc
Digital static output 1 24Vdc 10mA
Digital static output 2 24Vdc 10mA
24Vdc-100mA, digital and analogue I/O power supply. (See jumper P9)
Always connect to the screen bar
analogue 0V I/O
Programmable opto-isolated analogue inputs
±10V (±20mA)
differential configuration (Rin=33KX)
See Jumper P6-P7
analogue 0V I/O