Nidec Unidrive M400 series User Manual

Unidrive M400 Quick Start Guide 57
Issue Number: 8
Reverse Select, which is controlled by the drive sequencer, is used to invert Reference Selected
(Pr 00.081) or the Jog Reference (Pr 00.015).
Jog Select, which is controlled by the drive sequencer, is used to select the Jog Reference
(Pr 00.015).
This parameter displays the level of the analog signal present at analog input 1 (terminal 2).
This parameter displays the level of the analog signal present at analog input 2 (terminal 5).
00.092 Reverse Select
RO Bit ND NC PT
OL

Off (0) or On (1)

RFC-A
00.093 Jog Select
RO Bit ND NC PT
OL

Off (0) or On (1)

RFC-A
00.094 Analog Input 1
RO Num ND NC PT FI
OL

±100.00 %

RFC-A
00.095 Analog Input 2
RO Num ND NC PT FI
OL

±100.00 %

RFC-A

Nidec Unidrive M400 series Specifications

General

Brand	Nidec
Model	Unidrive M400 series
Category	Controller
Language	English