Nidec Unidrive M400 series User Manual

8 Unidrive M400 Quick Start Guide
Issue Number: 8
The harmonized standards used are shown below:
Person authorised to complete the technical file:
P Knight
Conformity Engineer
Newtown, Powys, UK
G. Williams
Vice President, Technology
Date: 6th September 2017
Place: Newtown, Powys, UK
IMPORTANT NOTICE
These electronic drive products are intended to be used with appropriate motors, controllers,
electrical protection components and other equipment to form complete end products or
systems. It is the responsibility of the installer to ensure that the design of the complete
machine, including its safety-related control system, is carried out in accordance with the
requirements of the Machinery Directive and any other relevant legislation. The use of a
safety-related drive in itself does not ensure the safety of the machine. Compliance with
safety and EMC regulations depends upon installing and configuring drives correctly,
including using the specified input filters. The drive must be installed only by professional
installers who are familiar with requirements for safety and EMC. The assembler is
responsible for ensuring that the end product or system complies with all relevant laws in the
country where it is to be used. For more information regarding Safe Torque Off, refer to the
Product Documentation.
EN 61800-5-1:2007
Adjustable speed electrical power drive systems - Part 5-1: Safety
requirements - Electrical, thermal and energy
EN 61800-5-2:2007
Adjustable speed electrical power drive systems - Part 5-2: Safety
requirements - Functional
EN ISO 13849-1:2008 +
AC:2009
Safety of Machinery, Safety-related parts of control systems,
General principles for design
EN ISO 13849-2:2008
Safety of machinery, Safety-related parts of control systems.
Validation
EN 61800-3: 2004+A1:2012
Adjustable speed electrical power drive systems - Part 3: EMC
requirements and specific test methods
EN 62061:2005 + AC:2010 +
A1:2013
Safety of machinery, Functional safety of safety related electrical,
electronic and programmable electronic control systems
EN60204-1:2006 + A1:2009
+ AC:2010
Safety of machinery — Electrical equipment of machines —Part 1:
General requirements
EN 61508 Parts 1 - 7:2010
Functional safety of electrical/ electronic/programmable electronic
safety-related systems

Nidec Unidrive M400 series Specifications

General

Brand	Nidec
Model	Unidrive M400 series
Category	Controller
Language	English