Need help?Do you have a question about the Nidek Medical TONOREFII and is the answer not in the manual?
General| Product Type | Auto Ref/Keratometer/Tonometer |
|---|---|
| Measurement Method (Tonometry) | Non-contact tonometry |
| Auto Alignment | Yes |
| Auto Trigger | Yes |
| Printer | Built-in thermal line printer |
| Measurement Range (Tonometry) | 7-60 mmHg |
| Pupil Diameter Measurement Range | 2.0-9.8mm |
| PD Measurement Range | 45 to 85 mm |
| Display | color LCD |
| Power Requirements | AC 100-240 V, 50/60 Hz |
| Axis | 0 to 180° |
Describes the RS-232C and LAN interfaces available for data transmission from the TONOREF II.
Introduces the RS-232C interface, its function, and lists basic interface specifications.
Covers various data formats including command formats, basic data, and specific measurement types for RS-232C.
Guides on connecting the TONOREF II to an external PC and running sample programs for data transfer.
Introduces the LAN interface, specifications, and cable connection for data transfer.
Details folder configuration and file formats (XML/JPEG) for LAN data transfer.
Describes the basic format and sample structure of XML files transmitted via LAN.
Shows sample printouts of measured data received from the TONOREF II via RS-232C.
Illustrates a sample printout of KM data when the I/F FORMAT parameter is set to Short.
Lists and explains error codes and their symptoms for RS-232C and LAN communication errors.
To Next Page