Nikon 1 J2 User Manual

90
Q
Selected JPEG images can be printed on a PictBridge printer
connected directly to the camera.
Connecting the Printer
Connect the camera using the supplied USB cable.
1
Turn the camera off.
2
Connect the USB cable.
Turn the printer on and connect the USB cable as shown. Do
not use force or attempt to insert the connectors at an angle.
3
Turn the camera on.
A welcome screen will be displayed in the monitor, followed
by a PictBridge playback display.
Printing Photographs
A
USB Hubs
Connect the camera directly to the printer; do not connect the
cable via a USB hub.
qw
A
Printing Via Direct USB Connection
Be sure the EN-EL20 battery is fully charged or use an optional EH-5b
AC adapter and EP-5C power connector.

Nikon 1 J2 Specifications

General

Sensor Type	CMOS
Effective Pixels	10.1 million
Screen Size	3.0 inches
Lens Mount	Nikon 1 mount
Effective Angle of View	Approx. 2.7x lens focal length (35mm format equivalent)
Movie File Format	MOV
Movie Video Compression	H.264/MPEG-4 AVC
Movie Audio Recording Format	AAC
Metering Method	Matrix, Center-weighted, Spot
Shutter Type	Electronic shutter
Dimensions	106 x 61 x 29.8 mm
Sensor Size	13.2 mm x 8.8 mm
Screen Resolution	921k-dot
Video Resolution	1920 x 1080 (60i/30p), 1280 x 720 (60p)
Battery Type	EN-EL20 Rechargeable Li-ion Battery
Image Size	3872 x 2592
File Format	JPEG, NEF (RAW)
Monitor Type	TFT LCD
Exposure Modes	Program, Shutter-priority, Aperture-priority, Manual
Shutter Speed	1/16000 to 30 s
Flash Sync Speed	1/60 sec
Shooting Mode	Continuous, Self-timer
Interface	USB 2.0
HDMI Output	HDMI mini-connector (Type C)
Storage Media	SD, SDHC, SDXC