Nikon 1 J2 User Manual

170
n
Attaching a Power Connector and AC Adapter
Turn the camera off before attaching an optional power connec-
tor and AC adapter.
1
Ready the camera.
Open the battery-chamber and
power connector covers.
2
Insert the EP-5C power connector.
Be sure to insert the connector in the
orientation shown, using the connec-
tor to keep the orange battery latch
pressed to one side. The latch locks
the connector in place when the con-
nector is fully inserted.
3
Close the battery-chamber cover.
Position the power connector cable so
that it passes through the power con-
nector slot and close the battery-
chamber cover.

Nikon 1 J2 Specifications

General

Sensor Type	CMOS
Effective Pixels	10.1 million
Screen Size	3.0 inches
Lens Mount	Nikon 1 mount
Effective Angle of View	Approx. 2.7x lens focal length (35mm format equivalent)
Movie File Format	MOV
Movie Video Compression	H.264/MPEG-4 AVC
Movie Audio Recording Format	AAC
Metering Method	Matrix, Center-weighted, Spot
Shutter Type	Electronic shutter
Dimensions	106 x 61 x 29.8 mm
Sensor Size	13.2 mm x 8.8 mm
Screen Resolution	921k-dot
Video Resolution	1920 x 1080 (60i/30p), 1280 x 720 (60p)
Battery Type	EN-EL20 Rechargeable Li-ion Battery
Image Size	3872 x 2592
File Format	JPEG, NEF (RAW)
Monitor Type	TFT LCD
Exposure Modes	Program, Shutter-priority, Aperture-priority, Manual
Shutter Speed	1/16000 to 30 s
Flash Sync Speed	1/60 sec
Shooting Mode	Continuous, Self-timer
Interface	USB 2.0
HDMI Output	HDMI mini-connector (Type C)
Storage Media	SD, SDHC, SDXC