124
Technical Notes
Connecting the EH-62A AC Adapter Kit
An optional EH-62A AC adapter kit can be used to provide power from a wall
plug outlet to the Nikon COOLPIX5200 when the camera is used for an ex-
tended period, such as connecting it with a computer or printer.
Before connecting the AC adapter kit, turn the camera off and make sure
that the power-on lamp has gone out.
1
Open the battery-chamber cover
and the power connector cover
( ), and then insert the EP-62A
power connector ( ).
Make sure the EP-62A is oriented correctly
and insert it into the battery chamber push-
ing aside the orange battery latch.
2
Lock the power connector.
The battery latch will be pushed out of the
way as the EP-62A is inserted; the battery is
fully inserted when the latch locks ( ).
3
Close the battery-chamber cover.
Making sure the EP-62A power connector
cord goes through the power connector
cover ( ), close the cover ( ) and slide it
back into place ( ).
EP-62A Power connector
Power connector cord
To Next Page
Loading...
