135
Technical Notes
Flash does not
fire
• Flash is off. Note that flash turns off automatically when:
The mode dial is set to (landscape assist; except for
Group right and Group left), (sports assist),
(movie), or (scene) mode with any of (Sun-
set), (Dusk/Dawn), (Night landscape),
(Museum) or (Fireworks show) selected in the
scene menu
Continuous is set to option other than Single
BSS is On
Auto bracketing is set
42
31, 32,
51, 35 -
38
82
84
88
Colors are unnat-
ural
• White balance does not match light source. 79
Picture or voice
memo can not be
played back
• Picture or voice memo has been overwritten or renamed
by computer or by another make of camera.
–
Copy can not be
created using
small picture, or
crop
• Picture is a movie. Retouched copy can be created only
for still pictures.
• Picture is a retouched copy.
• There is not enough free space in the memory or on the
memory card to store new copy. Delete unwanted pic-
tures from the memory to make free space.
105
55, 105
99
Can not zoom in
on picture
• Picture is a movie.
• Picture was created with small picture option.
• Picture has been cropped to sizes of 320×240 pixels or
smaller.
51
105
56
Provided soft-
ware does not
start when cam-
era is connected
or memory card
inserted in card
reader or card
slot
• Camera is off.
• EH-62A AC adapter kit (optional) is not properly con-
nected, or battery is exhausted.
• UC-E6 USB cable is not correctly connected, or card not
properly inserted in card reader or card slot.
• USB in the setup menu set to PTP when camera con-
nected to computer running Windows 2000 Profes-
sional, Windows Millennium Edition (Me), or Windows
98 Second Edition (SE).
• Camera is not registered in Device Manager (Windows
only).
See provided software Reference Manual (on CD) for fur-
ther information.
12
124
62
60
–
Problem Possible cause
To Next Page
Loading...
Need help?
General
Weight and Dimensions
