14
First Steps
Setting Display Language, Date and Time
When the first time the camera is turned on, the language-selection screen and
the date and time setting screen for the camera clock are displayed.
1 Press the power switch to turn on the camera.
The power-on lamp (green) will light, and then the
monitor will turn on (the power-on lamp turns off when
the monitor turns on).
2 Press the multi selector H or
I to choose the desired
language and press the k
button.
3 Press H or I to choose Yes and press the k
button.
To cancel the time zone and date setting, select No.
4 Press J or K to choose your home time zone
(A 97) and press the k button.
Cancel
Language
Multi selector
Yes
No
Time zone and date
Cancel
Choose time zone and
set date and time?
Back
London
Casablanca
D Daylight Saving Time
If daylight saving time is in effect, press H to enable the daylight
saving time function while setting the region in step 4.
When the daylight saving time function is enabled, W is displayed
at the top of the monitor. Press I to disable the daylight saving
time function.
Back
London
Casablanca
To Next Page
Loading...
