20
Basic Photography and Playback: G Easy Auto Mode
Step 2 Frame a Picture
1 Ready the camera.
Hold the camera steadily in both hands.
Keep fingers, hair and other objects away from the lens,
flash, AF assist-illuminator and microphone.
When taking pictures in “tall” orientation, turn the camera
so that the built-in flash is above the lens.
2 Frame the picture.
When the camera determines the scene mode, the
shooting mode icon will change (A 31).
When the camera detects a human face, that face will be
framed by a yellow double border (AF area).
Up to 12 faces can be detected. If more than one face is
detected, the face closest to the camera will be framed in
the focus area by a double border, and the other faces
will be framed by a single border.
When shooting non-human subjects or when no faces are detected, the camera will
focus on the subject in the center of the frame. Position the main subject near the center
of the monitor.
8
Shooting mode icon
B Easy Auto Mode
• The desired scene mode may not be selected in certain conditions. In this case, select another
shooting mode.
• When digital zoom is in effect, the shooting mode is U.
To Next Page
Loading...
