73
Editing Images
Editing Image
o Crop: Creating a Cropped Copy
This function is only available when u is displayed in the monitor with
playback zoom (A 59) enabled. Cropped copies are saved as separate files.
1 Rotate the zoom control to g (i) in full-frame
playback (A 56) mode to zoom in on an
image.
To crop an image captured with an Image mode set to
l2584×2016, zoom in on the image until the black
bars displayed at the top and bottom of the monitor both
disappear. The cropped image will be displayed in the aspect ratio of 4:3.
To crop an image displayed in “tall” (portrait) orientation, zoom in on the image until the
black bars displayed on the both sides of the monitor disappear.
The cropped image will be displayed in landscape orientation. If you want to crop the
portrait image in the captured position, use Rotate image (A 67) to change the
position of the portrait image to landscape before cropping it, and then return the
image to the captured position.
2 Refine copy composition.
Rotate the zoom control to g (i) or f (h) to adjust the
zoom ratio.
Press the multi selector H, I, J or K to scroll the
image until only the portion you want to copy is visible in
the monitor.
3 Press the d button.
4 Use the multi selector to select Yes and press
the k button.
A cropped copy is created.
To exit without saving the copy, choose No and press the
k button.
Yes
No
Save this image as
displayed?
To Next Page
Loading...
