12
First Steps
First Steps
Inserting the Batteries
1 Open the battery-chamber/memory card slot
cover.
Before opening the battery-chamber/memory card slot
cover, hold the camera upside down to prevent the
batteries from falling out.
2 Inserting the Batteries.
Confirm that the positive (+) and negative (–) terminals
are oriented correctly as described on the label at the
entrance of the battery chamber, and insert the batteries.
3 Close the battery-chamber/memory card slot
cover.
Applicable Batteries
• Two LR6/L40 (AA-size) alkaline batteries (batteries supplied)
• Two FR6/L91 (AA-size) lithium batteries
• Two EN-MH2 Ni-MH (nickel metal hydride) rechargeable batteries
Turning On and Off the Camera
Press the power switch to turn on the camera. After the
power-on lamp (green) lights for a moment, the
monitor turns on. When the camera turns off, both the
power-on lamp and monitor will turn off.
• If the camera is turned off, hold down c to turn the
camera on in playback mode (A 24).
1
3
2
1
2
To Next Page
Loading...
