Nikon CoolPix L24 - Transferring Images from a Camera to a Computer

58
Connecting to a Computer
Connecting to Televisions, Computers and Printers
Transferring Images from a Camera to a Computer
1 Start the computer to which ViewNX 2 was installed.
2 Be sure that the camera is off.
3 Connect the camera to the computer using the supplied USB cable.
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an
angle, and do not use force when connecting or disconnecting the USB cable.
4 Turn on the camera.
The power-on lamp will light. The camera monitor will
remain off.
B Connecting the USB Cable
T
he connection may not be recognized if the camera is connected to the computer via a USB hub.