Nikon CoolPix L24 - Setting Display Language, Date, and Time

14
First Steps
Setting Display Language, Date and Time
A language-selection dialog is displayed the first time the camera is turned on.
1 Press the power switch to turn on the camera.
The power-on lamp (green) will light for a moment and
the monitor will turn on.
2 Use the multi selector to choose
the desired language and press
k.
For information on using the multi selector,
see “The Multi Selector” (A 9).
3 Choose Yes and press k.
If No is selected, the date and time will not be set.
4 Press J or K to select your home time zone
(city name) (A 89) and press k.
Cancel
Date
Set time and date?
No
Yes
Back
London
Casablanca
D Daylight Saving Time
T
o use the camera in an area where daylight saving time is in effect,
press H on the home time zone in Step 4 to set the daylight saving
time to on.
When the daylight saving time setting is selected, the W mark
appears on the top of the monitor. To release the daylight saving
time setting, press I.
Back
London
Casablanca