F20
Specifications
Technical Notes and Index
Image size (pixels)
ISO sensitivity
(Standard output
sensitivity)
• ISO 80 - 3200
• Hi 1 (equivalent to ISO 6400), Hi 2 (equivalent to ISO 12800)
(available when using A, B, C or D mode)
Exposure
Metering mode Matrix, center-weighted or spot.
Exposure control
Programmed auto (with flexible program), shutter priority
auto, aperture-priority auto, manual, exposure bracketing,
exposure compensation (-2.0 EV - +2.0 EV in steps of 1/3 EV)
Shutter Mechanical and CMOS electronic shutter
Speed
• 1/2000 - 1 s
• 1/2000 - 60 s (when ISO sensitivity is set to 80 - 400 in D
mode)
• 1/4000 s (the fastest shutter speed when Pre-shooting cache
or Continuous H is selected)
Aperture Electronically-controlled 7-blade iris diaphragm
Range 14 steps of 1/3 EV (W) (C, D mode)
Self-timer Durations of 2 or 10 seconds can be selected
Flash
Range (approx.)
(ISO sensitivity: Auto)
[W]: 0.5 - 6.5 m (1 ft 8 in. - 21 ft)
[T]: 0.5 - 2.5 m (1 ft 8 in. - 8 ft 2 in.)
Flash control TTL auto flash with monitor preflashes
Flash exposure
compensation
In steps of 1/3 EV in the range between -2 and +2 EV
Interface Hi-Speed USB
Data transfer protocol MTP, PTP
Video output Can be selected from NTSC and PAL
HDMI output Can be selected from Auto, 480p, 720p and 1080i
I/O terminal
• Audio/video output; digital I/O (USB)
• HDMI micro connector (Type D) (HDMI output)
GPS
Receiver frequency 1575.42 MHz (C/A code), geodetic system
WGS 84
To Next Page
Loading...
