31
Shooting Features
Q Take soft pictures
• Softens the image by adding a slight blur to areas outside of the guide displayed
in the monitor.
• A guide is displayed in the monitor. Compose the shot so that the main subject
is contained within the guide.
• The flash is set to w Auto flash, but the setting can be changed (A23).
• Y Smile timer is not available (A25).
M Create a diorama effect
• This effect is well-suited for images captured from a high vantage point with the
main subject in the center of the image.
• A guide is displayed in the monitor. Compose the shot so that the main subject
is contained within the guide.
• The flash is set to y Flash off, but the setting can be changed (A23).
• Y Smile timer is not available (A25).
j Shoot a movie miniature
• Captures miniature-like still images every two seconds and joins the still images
to create a movie with a maximum length of 10 seconds.
• This effect is well-suited for images captured from a high vantage point with the
main subject in the center of the image.
• You cannot shoot when a memory card is not inserted. Do not replace the
memory card until shooting ends.
• Use a sufficiently charged battery to prevent the camera from turning off during
shooting.
• Compose the shot so that the main subject is contained in the guide displayed
in the monitor.
• Press the shutter-release button to capture the first image. Focus, exposure, and
hue are fixed at the values determined with the first image.
• The camera releases the shutter automatically after the first image.
• The monitor may turn off in between each shot.
• To end shooting, press flexible button 1 (Q). When 300 images are captured,
shooting ends automatically.
• Sound and still images are not recorded.
• The movie frame size is fixed at G Large (1080p).
• The flash setting is fixed at y Flash off (A23).
• Y Smile timer is not available (A25).
To Next Page
Loading...
