Nikon Coolpix S4100 - Using ViewNX 2

Step 1
CopyImages to the Computer
Use the Nikon Transfer 2 feature ofViewNX 2 to copy images to the computer.
1.1 Turn off the camera.
I
1.2 Connect the camera and computer with the supplied USB cable.
Confirm that the connector is properly oriented and then gently insert the connector,
making sure
that the connector is not inserted at an angle. When disconnecting, make
sure that the connector
is not removed at an angle.
The camera automatically turns on and the power-on lamp lights. The camera
monitor
will remain off.
When the action selection dialog
is displayed on the computer, select Nikon Transfer 2.
~ Using ViewNX 2