First Steps
14
4.
2 Make sure the battery is installed in the camera, and then
connect the camera to the Charging AC Adapter in order of 1
to 3.
• Make sure that the plugs are properly oriented. Do not insert or
remove the plugs at an angle when connecting or disconnecting
them.
B Note
Do not use a USB cable other than the UC-E21. Using a USB cable other than
the UC-E21 could result in overheating, fire or electric shock.
.
• The power-on lamp slowly flashes orange to indicate that the
battery is charging.
4.
3 Disconnect the Charging AC Adapter from the electrical outlet,
and then disconnect the USB cable.
Power-on lamp
Electrical outlet
USB cable (included)
To Next Page
Loading...
