Nikon Coolpix S810c Quick Start Guide

Shooting and Playback
23
Power Saving Function
By default, the camera reduces power consumption by automatically
entering the modes listed below.
1 You can change the amount of time that elapses before the camera enters
display off mode. The default setting is 1 minute.
2 The power-on lamp glows orange while the battery is charging.
3 The camera cannot enter stand by mode while the USB storage option is
turned on.
4 You can change the amount of time that elapses before the camera turns
off. The default setting is 1 hour. However, the camera cannot be turned off
while the battery is charging.
Mode Level Description
Display off
Medium
If no operations are performed for a while
when the camera is on, the monitor turns off
automatically and battery power
consumption is reduced.
1
The power-on lamp
glows green in this mode.
2
• To turn the monitor back on, press the
power switch, d button, W button or V
button.
• The camera enters stand by mode if no
further operations are performed for 1
minute.
3
Stand by
mode
High
Each function enters stand by mode and
battery power consumption is greatly
reduced. The power-on lamp flashes green in
this mode.
2
• To turn the camera back on, press the
power switch.
• The camera turns off if no further operations
are performed (Shut-down timer
4
).
Power off
Maximum
Almost no battery power is consumed, but it
takes a longer time to turn on the camera.

Nikon Coolpix S810c Specifications

General

Brand	Nikon
Model	Coolpix S810c
Category	Digital Camera
Language	English