Nikon Coolpix S810c Quick Start Guide

Shooting and Playback
22
Step 5 Turn Off the Camera
5. 1 Press and hold the power switch for
several seconds.
• If the monitor is already off, the camera
has entered power saving mode
(A23). Before turning the camera off,
press the power switch once to exit
power saving mode and turn the monitor back on.
• If you press the power switch once without holding it down, the
camera enters stand by mode (A23), and the monitor turns off.
5. 2 Select how the camera turns
off.
• Prepare for quick start
(default setting): The status of
the camera is saved before
turning off. The camera starts
up quickly the next time you
turn it on.
• Quick power off: The camera turns off immediately.
5. 3 Tap Power off.
• The camera turns off using the
option selected in step 2.
• If you tap Stand by on this
screen, the camera enters
stand by mode.
B Notes About Using Stand By Mode and Turning the Camera Off
• Unsaved data is lost when the camera turns off. Save the data that you
want to keep before the camera enters stand by mode, or before turning
off the camera.
• You cannot use stand by mode or turn off the camera while the USB
storage option is turned on (A30).
1910
1910
1910
Power off
Prepare for quick start
Quick power off
Reboot
Stand by
1910
1910
1910
Power off
Prepare for quick start
Quick power off
Reboot
Stand by

Nikon Coolpix S810c Specifications

General

Brand	Nikon
Model	Coolpix S810c
Category	Digital Camera
Language	English