Using ViewNX 2
31
2
.2 Transfer images to the computer.
• Confirm that the recording medium (memory card or internal
memory) of the connected camera or removable disk is displayed as
the “Source” on the “Options” title bar of Nikon Transfer 2 (
1
).
- When the camera and computer are connected, select the
recording medium (memory card or internal memory) that
contains the images you want to transfer.
• Click Start Transfer (
2
).
- To transfer images saved on both recording media (memory card
and internal memory), uncheck Disconnect automatically after
transfer in Preferences, and then click Start Transfer.
• At default settings, all the images on the memory card will be copied
to the computer. Comments that have been added to images are
also transferred with the images.
- When the transfer of images from one recording medium is
completed while Disconnect automatically after transfer is
unchecked, Nikon Transfer 2 quits automatically and ViewNX 2
starts.
If you want to continue transferring images from another
recording medium, click Transfer on the ViewNX 2 toolbar, start
Nikon Transfer 2, and then import the images to the computer.
1
2
To Next Page
Loading...
