Nikon D2Hs - Voice Memos

123
Taking Photographs—Non-CPU Lenses
Specifying Maximum Aperture
Lens maximum aperture can be specifi ed using the Non-CPU lens data op-
tion in the shooting menu or by pressing the FUNC. button and rotating the
sub-command dial. The following f/-numbers are available:
• 1.2, 1.4, 1.8, 2, 2.5, 2.8, 3.3, 3.5, 4, 4.5, 5, 5.6, 6.3, 7.1, 8, 9.5, 11, 13,15,
16, 19, 22
The Non-CPU Lens Data Menu
1
Highlight Non-CPU lens data in the shooting
menu ( 158) and press the multi selector to
the right.
2
Highlight Maximum aperture and press the
multi selector to the right.
3
Select the f/-number corresponding to the
maximum lens aperture and press the multi
selector to the right.
SB-8 00 / SB-6 00
If an SB-800 or SB-600 Speedlight is mounted on the camera, turn the Speedlight off
before using the FUNC. button to specify lens data.
Zoom Lenses
Lens data are not adjusted when non-CPU lenses are zoomed in or out. After changing
the zoom position, select new values for lens focal length and maximum aperture.