223
Connections—Connecting to a Computer
Connecting to a Computer
Data Transfer and Camera Control
The supplied UC-E4 USB cable can be used to connect the camera to a com-
puter. Once the camera is connected, PictureProject can be used to copy
photographs to the computer, where they can be browsed, viewed, and
retouched. The camera can also be used with Nikon Capture 4 version 4.2.1
or later (available via download to purchasers of Nikon Capture 4), which
supports batch processing and more advanced image editing options and
can be used to control the camera directly from the computer.
Before Connecting the Camera
Install the necessary software after reading the manuals and reviewing the
system requirements. To ensure that data transfer is not interrupted, be sure
the camera battery is fully charged. If in doubt, charge the battery before use
or use an EH-6 AC adapter (available separately).
Before connecting the camera, set the USB option
in the setup menu ( 208) according to the com-
puter operating system and whether the camera
is being controlled from Nikon Capture 4 version
4.2.1 or later or photographs are being trans-
ferred to the computer using PictureProject:
PictureProject
Transfer
Windows XP Home Edition
Windows XP Professional
Choose PTP or
Mass Storage
Mac OS X
Windows 2000 Professional
Windows Millennium Edition (Me)
Windows 98 Second Edition (SE)
Choose
Mass Storage
*
Nikon Capture 4
Camera Control
Choose PTP
Mac OS 9 Not supported
Operating system
* Do
NOT select PTP. If PTP is selected when the camera is connected, the Windows
hardware wizard will be displayed. Click Cancel to exit the wizard, and then discon-
nect the camera. Be sure to select Mass storage before reconnecting the camera.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
