The documentation for this product includes the manuals listed below.
Please be sure to read all instructions thoroughly to get the most from your
cam era.
Quick Start Guide
The Quick Start Guide takes you through the process of unpacking and
set ting up your Nikon digital camera, taking your fi rst photographs, and
trans fer ring them to your computer.
Guide to Digital Photography
The Guide to Digital Photography (this manual) provides complete op er -
at ing in struc tions for your camera.
PictureProject reference CD
The PictureProject reference CD contains information on installing and us-
ing PictureProject. See the Quick Start Guide for viewing instructions.
CAUTION: Foreign Matter on the Low-Pass Filter
Nikon takes every possible precaution to pre vent foreign matter from com ing into
con tact with the low-pass fi lter during production and ship ping. The D2Hs, how ev er,
is designed to be used with interchangeable lens es, and for eign matter may enter the
camera when lens es are removed or exchanged. Once inside the camera, this for eign
matter may adhere to the low-pass fi lter, where it may appear in photographs tak en
under cer tain con di tions. To prevent foreign matter from entering the camera, do
not exchange lenses in dusty environments. To pro tect the camera when no lens is in
place, be sure to replace the body cap pro vid ed with the camera, being care ful to fi rst
remove all dust and other foreign matter that may be ad her ing to the body cap.
Should foreign matter fi nd its way onto the low-pass fi lter, clean the low-pass fi lter as
instructed on pages 244–245 of this manual, or have the low-pass fi lter cleaned by
authorized Nikon ser vice per son nel. Pho to graphs affected by the presence of for eign
matter on the low-pass fi lter can be re touched us ing Nikon Capture 4 version 4.2.1
or later (available via download to purchasers of Nikon Capture 4) or the clean image
options available in some third-party im ag ing software.
Product Documentation
To Next Page
Loading...
Need help?
General
Weight and Dimensions
