Nikon D2Hs - Page 188

174
Menu Guide—Custom Settings
Custom Setting a1: AF-C Priority Selection
This option controls whether photographs can
be taken whenever the shutter-release button is
pressed (release priority) or only when the camera
is in focus (focus priority) in continuous-servo AF.
Highlight a1 AF-C mode priority in the second
level of the CSM menu (
169) and press the
multi selector to the right. Press the multi selector up or down to highlight
an option, then press to the right to make a selection.
Custom Setting a2: AF-S Priority Selection
This option controls whether photographs can
be taken only when the camera is in focus (focus
priority) or whenever the shutter-release button is
pressed (release priority) in single-servo AF. High-
light a2 AF-S mode priority in the second level
of the CSM menu ( 169) and press the multi
selector to the right. Press the multi selector up or down to highlight an op-
tion, then press to the right to make a selection.
Option Description
Focus
(default)
Photos can only be taken when in-focus indicator (●) is displayed.
Release Photos can be taken whenever shutter-release button is pressed.
Option Description
FPS rate
(default)
Photos can be taken whenever shutter-release button is pressed.
FPS rate
+ AF
Photos can be taken even when camera is not in focus. In continuous
mode, frame rate slows for improved focus if subject is dark or low con-
trast.
Focus
Photos can only be taken when in-focus indicator (●) is displayed.