Nikon D2Hs - Page 207

193
Menu Guide—Custom Settings
Custom Setting e6: Auto Bracketing in M Exposure Mode
This option controls what settings are affected
when AE & fl ash or AE only is selected for
Custom Setting e5 in manual exposure mode.
Highlight e6 Manual mode bkting in the sec-
ond level of the CSM menu (
170) and press the
multi selector to the right. Press the multi selector
up or down to highlight an option, then press to
the right to make a selection.
Option Description
Flash/speed/
aperture
Flash/speed
(default)
Camera varies shutter speed (Custom Setting e5 set to AE only) or
shutter speed and fl ash level (Custom Setting e5 set to AE & fl ash).
Camera varies shutter speed and aperture (Custom Setting e5 set to
AE only) or shutter speed, aperture, and fl ash level (Custom Setting
e5 set to AE & fl ash).
Flash only
Flash/
aperture
Camera varies aperture (Custom Setting e5 set to AE only) or aper-
ture and fl ash level (Custom Setting e5 set to AE & fl ash).
Camera varies fl ash level only (Custom Setting e5 set to AE & fl ash).
• If no fl ash is attached when Custom Setting b1 (ISO auto) is on, camera will vary
sensitivity only, regardless of setting selected.
• Flash bracketing performed only with i-TTL, D-TTL, or AA fl ash control.
Custom Setting e7: Auto Bracketing Order
This option controls the order in which bracketing
is performed. Highlight e7 Auto BKT Order in
the second level of the CSM menu ( 170) and
press the multi selector to the right. Press the
multi selector up or down to highlight an option,
then press to the right to make a selection.
Option Description
Under>MTR>Over Bracketing proceeds in order from lowest to highest value.
MTR>Under>Over
(default)
Bracketing performed in order described in “Bracketing” (
96).