Nikon D2Hs - Page 75

61
Taking Photographs—White BalanceTaking Photographs—White Balance
Selecting a White Balance Preset
To set white balance to a preset value:
1
Highlight White bal. preset in the white bal-
ance menu (
52) and press the multi selector
to the right. The menu shown at right will be
displayed. (To return to the shooting menu,
press the
button.)
2
Presets are identifi ed by an icon or thumbnail,
a name (d-0 – d-4), and a comment. Press the
multi selector up, down, left, or right to high-
light the desired preset. To select the high-
lighted preset and return to shooting mode
without completing steps 3–5, press the
button.
3
Press the center of the multi selector to display
the menu shown at right. To view options for
other presets, highlight the name of the cur-
rent preset (d-0 – d-4) and press the multi
selector right.
Selecting a White Balance Preset: the WB Button
At a setting of (White bal. preset), presets can also
be selected by pressing the WB button and rotating the
sub-command dial. The current preset is displayed in
the rear control panel while the WB button is pressed.