190
Menu Guide—Custom Settings
Option Description
Off
(default)
On
Exposure compensation set by rotating command dial only. Dial used de-
pends on option selected for Custom Setting f5 > Change Main / Sub.
Command dials (Custom Setting f5) > Change Main / Sub
Off On
Exposure
mode
P Sub-command dial Sub-command dial
S Sub-command dial Main command dial
A Main command dial Sub-command dial
M N / A
Exposure compensation set by pressing button and rotating main
command dial.
Custom Setting b5: Easy Exposure Compensation
This option controls whether the button is needed to set exposure
compensation ( 97). If On is selected, the 0 at the center of the exposure
display will blink even when exposure compensation is set to ±0.
Highlight b5 Exposure comp. in the second level
of the CSM menu ( 177) and press the multi
selector to the right. Press the multi selector up
or down to highlight an option, then press to the
right to make a selection.
To Next Page
Loading...
