90
Custom SettingsSetup
4: No SD Card?
At the default setting of Release Locked, the
shutter-release button is only enabled when a
memory card is inserted. Choose Enable Re-
lease to enable the shutter-release button when
no memory card is inserted. Photographs will be
displayed in the monitor but will not saved.
5: Image Review
This option determines whether photographs
are automatically displayed in the monitor after
shooting (On, the default option) or only when
the button is pressed (Off).
6: Flash Level
Adjust fl ash level (P, S, A, and M modes only;
38). The default setting is 0.
7: AF Assist
At the default setting of On, the AF-assist lamp
lights automatically when required to assist the
focus operation. The AF-assist lamp will not light
when Off is selected or when the camera is fo-
cusing using continuous-servo autofocus ( 88).
This option is not available in and modes.
To Next Page
Loading...
