22
Tutorial—Using the Self-timer or Remote Control
The self-timer or optional ML-L3 remote control can be used for photo-
graphs in which you wish to appear yourself. To use the self-timer:
Using the Self-timer or Remote Control
1
Mount the camera on a tripod (recommend-
ed) or place the camera on a stable, level
sur face.
2
The current self-timer / remote control mode
is shown in the control panel. Use the
button to select one of the following modes:
Mode Description
NO
ICON
Timer
off
Photos are taken when shutter-
release button is pressed.
Self-
timer
Photos are taken about 10 s
after shutter-release button is
pressed.
Delayed
remote
Photos are taken about 2 s after
shutter-release button on re-
mote control is pressed.
Quick-
response
remote
Photos are taken when shut-
ter-release button on remote
control is pressed.
Mode Selection
The self-timer / remote control mode can also be selected by pressing the button
and rotating the command dial.
3
Frame the photograph.
4
To prevent light entering via the viewfi nder
from interfering with exposure, cover the
viewfi nder eyepiece with the supplied eye-
piece cap as shown at right.
To Next Page
Loading...
